Application range

• For hoisting equipment and conveyor systems
• Indoor cranes and high-rack facilities
• As supply line for moving machine parts
• According to VDE definition, this can also be used as a lift control cable with up to 35 m suspension length, and a maximum speed of travel at 1.6 m/s
• The application profiles for ÖLFLEX® CRANE and ÖLFLEX(R) LIFT cables can be found in the appendix, selection table A3

Benefits

• Flat cables need less space than round cables
• Smaller bending radii is possible

Product Make-up

• Strands of bare copper wires
• Core insulation: Based on PVC
• PVC-based outer sheath

  Core identification code Up to 5 cores: colour-coded according to VDE 0293-308, refer to Appendix T9 From 6 cores: black with white numbers Classification ETIM 5.0 Class-ID: EC000825 ETIM 5.0 Class-Description: Flat cable Conductor stranding U0/U 300/500 V versions, fine wire according to VDE 0295 Class 5 or IEC60228 Cl. 5 U0/U 450/750 V versions, extra-fine wire according to VDE 0295 Class6 or IEC 60228 Cl. 6 (from nominal conductor cross section 10 mm²: finely stranded/ class 5) Minimum bending radius Flexible use: 10 x cable thickness

  Nominal voltage Up to 1.0 mm²: U0/U: 300/500 V From 1.5 mm²: U0/U: 450/750 V Test voltage 3000 V Protective conductor G = with GN-YE protective conductor X = without protective conductor Temperature range Flexible use: 0 °C to +70 °C (up to 1.0 mm²) -15 °C to +70 °C (as from 1.5 mm²)